Application: | Motor |
---|---|
Function: | Change Drive Torque |
Layout: | Three-Ring |
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Step: | Three-Step |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
General & Basic information/ | |||||||
NO. | Description/ | Value/ | |||||
1 | Outer diameter/ | Φ26mm | |||||
2 | Type of Gearbox/ | Planetary/ | |||||
3 | Housing material/ | Metal/ | |||||
4 | Type of teeth/ | Straight/ | |||||
5 | Teeth material/* | Steel/* | |||||
6 | Output shaft material/ | Stainless Steel/ | |||||
7 | Bearing at output/ | Ball Bearing/ | |||||
8 | No-load backlash/ | ≤2° | |||||
9 | Number of stages availability/ | 1,2,3,4 | |||||
10 | Axial play/ | ≤0.1 mm | |||||
11 | Radial play/(8mm from flange/10mm) | ≤0.03 mm | |||||
12 | Dynamic Max. axial load/ | ≤25N | |||||
13 | Max. force for press fits/ | ≤50N | |||||
14 | Max. radial force/(8mm from flange/10mm) | ≤70N | |||||
15 | Operating temperature range/ | -40°C to +120°C | |||||
16 | Operating relative humidity/ | 20%RH to 90%RH | |||||
* Normally the 1st stage gears to motor made by plastic in order to reducing noise if stage number more than 1. | |||||||
* 1,. | |||||||
Technical Data/ | |||||||
NO. | Description/ | Value/ | |||||
17 | Number of gear stages/ | 1 | 2 | 3 | 4 | ||
18 | Reduction ratio/ | 3.7:1 4.3:1 5.2:1 |
The ratio can be one of combinations of 3 ratios | ||||
19 | Max. continuous input speed/ | 8,000rpm | 10,000rpm | 15,000rpm | 15,000rpm | ||
20 | Max. intermittent input speed/ | 10,000rpm | 15,000rpm | 20,000rpm | 20,000rpm | ||
21 | Max. continuous torque/ | 500mNm | 750mNm | 2,000mNm | 2,500mNm | ||
22 | Max. intermittent torque/ | 750mNm | 1,100mNm | 3,000mNm | 3,750mNm | ||
23 | Direction(from the driver to output) /() | Same | Same | Same | Same | ||
24 | Max. efficiency/ | 90% | 81% | 73% | 65% | ||
25 | Weight without motor/(g) | 50 | 62 | 75 | 89 | ||
26 | L2[mm]=Length without motor/ | 21.5 | 30.5 | 39.5 | 48.5 | ||
27 | L1[mm]=Length with motor/ | The total length of gear motor depends on the motor specified. . |
|||||
Reduction ratio | Motor pinion specifications/ | ||||||
Material | Number of teeth | Length | Hole diameter | ||||
5.2:1 / 19.2:1 / 22:1 / 27:1 / 99:1 / 115:1 / 139:1 / 721:1 | Steel/ Copper/ |
z=11 | L=5 | Pict
|
|||
4.3:1 / 16:1 / 18.3 / 79:1 / 218:1 / 337:1 | z=14 | L=5 | |||||
3.7:1 / 13.7:1 / 51:1 / 189:1 | z=17 | L=5 |
Suppliers with verified business licenses